gedrillbit-Built-For-Extreme-banner
Rock Drilling Tools Manufacturer

Tricone & PDC Bits Built for Extreme Formations

IADC-coded TCI and milled tooth tricone bits, PDC bits and drag bits for mining, water well and oil & gas drilling. OEM sizes available.

gedrillbit-Purple-Tricone-Quarry-banner
IADC 217 - 837 Series

TCI & Milled Tooth Tricone Bits for Every Formation

From soft shale to hard granite - sealed journal bearings, API reg threads, sizes from 3 7/8 inch to 26 inch.

Rock-Drill-bit-for-difference-formation
Water Well & Exploration Drilling

Drag Bits & Special Tools for Shallow Drilling

2-wing and 3-wing stepped drag bits with API thread connections; custom sizes on request.

24-Hour Quotation

Send your formation and hole size - our engineers reply with a bit recommendation within 24 hours.

OEM & Custom Sizes

Custom diameters, API threads and carbide grades matched to your formation and rig.

Professional Rock Drilling Tools Supplier

The Right Bit for Every Formation

Suzhou Gedrill supplies IADC-coded tricone bits, PDC bits, drag bits and special tools for mining, water well and oil & gas drilling. OEM and custom sizes available.

Fast quotation within 24 hours. OEM & custom sizes supported, global shipping available.

24-Hour Quotation
Fast response by sales engineers
OEM & Custom Sizes
Custom diameters, threads and logo
Global Shipping
Exported to 30+ countries
Rock-Drill-bit-for-difference-formation
Featured products
TCI Tricone Drill Bit
Request Quote

Premium tungsten carbide insert tricone bit for oil, gas and mining wells. API thread connections.

IADC CODED
API thread, all standard sizes
APPLICATIONS
Mining, water well, oil & gas
QUALITY
Factory direct with QC reports

Tricone and PDC drill bits in our warehouse, ready for shipment

Tricone / PDC / Drag bits

Why customers choose Gedrill

Engineering support behind every bit.

We match each bit to your formation and rig — from selection to after-sales, our engineers stay involved until the hole is done.

01 / FORMATION MATCHING1

The right bit for your formation

Tell us your geology, rig specs and hole size. We recommend IADC codes, cutter types and hydraulics that fit the job.

Tricone / PDC / Drag
Browse Products
02 / QUALITY CONTROL2

Factory direct with full QC reports

Every bit is inspected before shipment — dimensional checks, hardfacing and gauge are documented and shipped with the goods.

IADC coded / API threads
Read the guides
03 / SERVICE & SUPPORT3

Responsive support from quote to delivery

Clear quotations within 24 hours, OEM & custom sizes, and responsive after-sales for every order.

Quote / OEM / Shipping
Get a Quote

Featured Drill Bits

Tricone & PDC Bits Built for Every Formation

IADC-coded TCI tricone bits and matrix body PDC bits for water well, mining, geothermal and oil & gas drilling. Factory-direct sizes from 6 1/2" to 12 1/4" - custom IADC codes and sizes available.

Every bit is factory-inspected before shipping. OEM orders and custom IADC configurations welcome.

View all products
12-1-4-inch-api-matrix-body-pdc-bit-oil-well-1
PDC Drill Bit

12 1/4" API Matrix Body PDC Drill Bit

12 1/4 inch (311 mm) API matrix body PDC drill bit for oil well drilling. Built for high rate of penetration in soft to medium formations, with gauge pads and hydraulic design matched to your well program.

View product
8-1-2-inch-matrix-body-pdc-drill-bit-oil-mining-2
PDC Drill Bit

8 1/2" Matrix Body PDC Drill Bit

8 1/2 inch (215.9 mm) matrix body PDC drill bit for oil, gas and mining wells. Polycrystalline diamond compact cutters deliver high rate of penetration in shale and soft-to-medium rock. Blade count, cutter layout and hydraulics built to your well plan.

View product
12-1-4-inch-iadc825-tci-tricone-bit-hard-rock-1
Tricone Drill Bit

12 1/4" IADC825 TCI Tricone Drill Bit

12 1/4 inch (311 mm) TCI tricone rock bit, IADC code 825: sealed roller bearing with tungsten carbide insert cutters for hard, abrasive formations. Used in mining, geothermal and oil and gas drilling where basalt, chert or hard limestone is present.

View product
11-inch-iadc645-tci-tricone-bit-oil-gas-drilling-2
Tricone Drill Bit

11" IADC645 TCI Tricone Drill Bit

11 inch (279.4 mm) TCI tricone drill bit, IADC code 645: tungsten carbide insert cutters on a sealed journal bearing for medium and medium-hard formations. Typical applications: oil and gas wells, deep water wells and geothermal drilling.

View product
6-1-2-inch-iadc535-tci-tricone-drill-bit-water-well-mining-1
Tricone Drill Bit

6 1/2" IADC535 TCI Tricone Drill Bit

6 1/2 inch (165 mm) TCI tricone drill bit, IADC code 535: tungsten carbide insert cutters on a sealed roller bearing. Suited to soft and medium formations such as water well, geothermal and mining drilling. API thread connection, nozzles and gauge protection built to order.

View product
material-story-media

Materials and quality control

Verified steel, tested cutters, inspected bits.

Every Gedrill bit starts with certified alloy steel round bar. Each raw-material batch is tested by an independent laboratory — chemical composition, tensile strength, impact toughness and hardness — before it enters production, and finished bits are inspected against API and IADC requirements befor

15CrNiMn alloy steel

Bit body steel from certified round bar; third-party lab reports for chemistry, tensile and hardness kept for every batch.

Tungsten carbide inserts

TCI and PDC cutters selected per formation, with hardness and wear resistance matched to the rock you drill.

Bearing & seal system

Sealed journal bearings with hardened races — the load path that decides how long a tricone bit lives.

Request test reports

Stories and guides

Drilling guides, product knowledge, and company updates

Read the latest drilling guides, product knowledge, and company updates from the Gedrill team.

View all stories
Latest stories

Drill bit FAQ

Answers for buyers and drilling engineers

Quick answers about bit selection, IADC codes, customization and delivery. For anything specific, send us your well data — our engineers reply within 24 hours.

Still have a question? Send us your formation, hole size and target depth — our engineers reply within 24 hours.

Drilling notes

Drilling guides and bit knowledge, once a month.

Practical notes on bit selection, IADC codes and well planning from the Gedrill engineering team. No spam, unsubscribe anytime.

One email a month. Unsubscribe anytime.

Contact

Tell us what you are looking for

Send a question, wholesale request, or project brief — our engineers reply with a bit recommendation within 24 hours.

Email
lisaliu638@gmail.com
Phone
+86 198 0519 5206
Office
Suzhou City, Jiangsu Province, China
Hours
Mon-Fri, 9:00-18:00 (GMT+8)

Inquiry intake

Send the details

Share a few details about your request so we can send a useful reply.

0/120
0/1200